• Open Positions: 2 

• Location: Mysore

Job Description:

1. Should have strong basic electronics fundamentals
2. Should have knowledge in DC/DC converters, AC/DC converters and Inverters
3. Should have sufficient knowledge to isolate the issues
4. Should have experience in using different tools like multi meter, DSOs to diagnose a faulty machine
5. Should have experience in visual inspection of PCB for signs of malfunctions.

Required years of experience: 2-4 years of experience in UPS Repair/Service.

Posted on :17-02-2022

• Open Positions: 3

• Location: Mysore

Job Description & Requirements:

Responsibilities

1. Write code and develop scenarios to test coverage of component requirements using hardware and software
2. Analyse and interpret firmware requirements correctly to come up with test designs that provide comprehensive coverage, and ensure requirement-to-test traceability
3. Ability to work closely with hardware, software and firmware engineers to assist in debugging, test and development
4. Experience in Firmware testing, automated and manual testing
5. Experience in coding in what languages needs to be filled- C, C++?
6. Identify effective and efficient mode of test implementation, prepare script-based automated FW testing routines, and create high quality procedures to implement the test designs
7. Develop clear and concise test reports

Requirements
1. 2-4 years of relevant experience
2. Experience in developing reusable code
3. Ability to develop test guidelines from specifications
4. Experience using embedded data acquisition tools – NI, Peak etc.
5. Understanding of revision control software is a plus like SVN, GIT etc.

Required years of experience: 2-4 years of relevant experience

Posted on :17-02-2022

• Open Positions: 3
• Location: Mysore

Job Description & Requirements:

1. Responsible for creating hardware design using processors and microcontroller, schematic design for the requirement of R&D, production and Commercial deployment
2. Strong understanding of Basic Electronics fundamentals
3. Experience in design and analysis of Analog, Digital, Power and sensor interface circuits
4. Knowledge of application and characteristics of various semiconductor devices
5. Hands on experience in debugging, board bring up and troubleshooting techniques • Plan and implement test plans for products to meet internal, international standards and customer specific test requirements
6. Experienced in using Schematic CAD tools and good understanding of layout design life cycle
7. Familiarity with debugging instruments like oscilloscope, multi-meters, signal generators, etc. for hands-on testing purpose
8. Should be able to handle the design decisions such as the selection of right components like microprocessors/ microcontrollers, Ics and others

Required years of experience: Minimum 2 years of relevant experience

Posted on :17-02-2022

• Open Positions:2

• Location: Mysore

Job Description & Requirements:

1. Experience in Design and implement software of embedded devices and systems from requirements to production and commercial deployment
2. Solid programming experience in C or C++
3. Experience on 16/32-bit microcontrollers / processors and their architecture
4. Ability to understand and read hardware schematics
5. Designing and implementing software of embedded devices and systems
6. Experience with Digital Signal Processing digital filters
7. Ability to effectively use a Volt/Ohm meter and an Oscilloscope
8. Developing experience in real-time and multi-threaded applications
9. Thorough knowledge of hardware interfaces: I2C, GPIO, Uart, and SPI
10. Deep Understanding on Wireless Protocols: Wi-Fi, 4G, and Bluetooth
11. Solid debugging and troubleshooting experience with Firmware.

Required years of experience: 7-8 years of relevant experience.

Posted on :17-02-2022

• Open Positions:2

• Location: Mysore

Job Description & Requirements:

1. Good knowledge and hands-on about Analog and Power Circuit, MOSFET circuits etc.
2. Should have knowledge in Various Switching Topologies like Buck-Boost, SEPIC, Bridge etc.
3. Good knowledge in design of CAN/LIN, Microprocessor/ Microcontrollers circuits and Hardware-Software interface requirements
4. Exposure to High-speed circuits design and concepts
5. Should have good knowledge/experience in design justification design rules about Electronic Devices like, BJTs, Power MOSFETs, IGBTs, Scotty Diodes, etc.
6. Should understand PCB Layout concepts and techniques for Power, Mixed and Digital circuits
7. Exposure to Motor drive application circuit design
8. Should have good hands-on in HW circuit simulation, Worst-case analysis, different HW related tests etc.,
9. Good Knowledge about EMI/EMC concepts/Design Techniques
10. Knowledge on standards is added advantage (ISO/CISPR/..) etc.
11. Exposure to Thermal concepts in electronic design,
12. Hands on experience in Design, Product Development and testing, and other activities in electronic product life Cycle
13. Exposure to Requirement analysis, collaborative interaction with other product design teams like Systems, Software, Mechanical design teams, etc.
14. Exposure to automotive product hardware design is an added advantage.

Required years of experience: 5-7 years of relevant experience

Posted on :17-02-2022

• Open Positions:3

• Location: Mysore

Job Description & Requirements:

Fresher in B.E – Electronics & Communication OR
Fresher in B.E – Electrical and Electronics

Required years of experience:0-1 years

Posted on :17-02-2022

• Open Positions:3

• Location: Mysore

Job Description & Requirements:

Fresher in B.E – Electronics & Communication OR
Fresher in B.E – Electrical and Electronics

Required years of experience:0-1 years

Posted on :17-02-2022